Follow Us

----------------------------------------------------------

Friday, 2 February 2018

Sand

Sand is a natural product which is obtained as river sand, nalla sand and pit sand. However sea sand
should not be used for the following reasons:
1. It contains salt and hence structure will remain damp. The mortar is affected by efflorenscence
and blisters appear.
2. It contains shells and other organic matter, which decompose after some time, reducing the
life of the mortar.
Sand may be obtained artificially by crushing hard stones. Usually artificial sand is obtained
as a by-product while crushing stones to get jelly (coarse aggregate).


Sand is used in mortar and concrete for the following purpose:
1. It sub-divides the paste of binding material into thin films and allows it to adhere and spread.
2. It fills up the gap between the building blocks and spreads the binding material.
3. It adds to the density of the mortar.
4. It prevents the shrinkage of the cementing material.
5. It allows carbon dioxide from the atmosphere to reach some depth and thereby improve
setting power.
6. The cost of cementing material per unit volume is reduced as this low cost material increases
the volume of mortar.
7. Silica of sand contributes to formation of silicates resulting into the hardened mass.
The properties of good sand are:
1. It should be chemically inert.
2. It should be free from organic or vegetable matter.
3. It should be free from salt.
4. It should contain sharp, angular and coarse grains.
5. It should be well graded.

6. It should be hard.

No comments:

Post a Comment